Enhanced electrical performance of LiMnPO4 by carbon coating for solid-state battery applications

High-energy ball milling was employed to fabricate LiMnPO4 coated with varying carbon ratios (3%wt, 7%wt, and 10%wt), using glucose as a carbon source. The process involved pre-milling of LiMnPO4 precursors, followed by granulation through high-energy ball milling at 270 rpm for 2 h, and subsequent calcination at 700 °C without an inert gas flow. XRD analysis discerned the phases and structure of LiMnPO4, confirming the successful attainment of a single-phase LiMnPO4 without impurities. Rietveld refinement of the XRD data elucidated the crystallographic details, affirming the material's orthorhombic olivine structure with precise lattice parameters, thereby underpinning the structural integrity essential for electrochemical applications. FE-SEM analysis revealed uniformly distributed semi-sphere particles, with sizes ranging from 130 nm for LM to 183 nm for LM-10%C. FTIR analysis delineated the internal modes of vibration in the olivine structure and verified the presence of carbon on the powder surface. Electrical measurements conducted within the frequency range of 20 Hz–100 kHz demonstrated an increase in electrical conductivity with an escalation in carbon concentration, ranging from 31 μΩ−1m−1 to 75 μΩ−1m−1 for 0%C and 10%C, respectively. A temperature-dependent study spanning 30–160 °C revealed stable electrical conductivity behavior for the samples, with a marginal increase observed at elevated temperatures.