Metallurgical Method of Determining Heat Transfer Coefficient in Simulations of Twin-Roll Casting

We herein suggest a metallurgical method using pure aluminum with no freezing temperature range to derive appropriate roll/melt interfacial heat transfer coefficients in simulation of twin-roll casting process. This method is inspired by the concept that the position of the kiss points where two solidifying shells encounter and the roll nip coincides under the condition where the roll load becomes zero as the roll rotation speed decreases. The conditions where the roll load becomes zero under various melt supply temperature conditions in the actual TRC process are found experimentally. These conditions are then applied to simulation models to derive heat transfer coefficient values. When comparing these values with those derived previously from the empirical relation for roll rotation speed and heat transfer coefficient, the conclusion is drawn that the deviation was reasonably low, around 10%.