Finite element analysis of stress distribution in unilateral distal extension partial dentures: a comparison of four attachment designs

桥台 前磨牙 假牙 可摘局部义齿 有限元法 口腔正畸科 材料科学 牙科 臼齿 医学 结构工程 工程类
作者
Maha Nagy Mohamed Kamal,Haitham Amr,Abdallah Shokry
出处
期刊:BMC Oral Health [BioMed Central]
卷期号:25 (1): 810-810 被引量:4
标识
DOI:10.1186/s12903-025-06213-w
摘要

BACKGROUND: Due to lack of consensus on optimal unilateral attachment retained partial denture design, this finite element comparative analysis study was conducted to measure the stresses induced from four different attachment-retained lower Kennedy class II removable partial denture (RPD) designs around the abutment teeth and the supporting residual ridge. MATERIALS AND METHODS: An educational cast of lower Kennedy class II having the first premolar as the last standing abutment was used. The abutment teeth - canine and first premolar- of the edentulous side were reduced to receive two splinted porcelain veneered metal crowns, while the intact side was prepared to receive a double Aker's clasp and mesial rest seat for indirect retention. Then the cast was scanned, and the partial denture components and the splinted crowns were designed and assembled digitally using Blender4dental software. According to the attachment used; partial dentures were designed as follows: design 1: unilateral PD retained by OT cap attachment, design 2: unilateral RPD retained by double OT cap attachment, design 3: unilateral RPD retained by mini-bar attachment, and design 4: RPD retained by OT cap with major connector crossing the arch for stabilization (conventional RPD). The Meshmex software was used to modify the STL file, and the Abaqus software was used for finite element analysis. On the edentulous side, the first and second molars were subjected to vertical loads of 200 N and tangential loads of 23.5 N, while the first and second premolars were subjected to vertical loads of 140 N and tangential loads of 16.45 N. The von Misses stress levels induced around the abutments and at the residual ridge were measured and compared. RESULTS: The lowest stresses were found with the conventional RPD design. Regarding von Mises stresses on the prepared abutments; The lowest von Mises stresses were found in design 4, followed by design 1, then design 3, while the highest von Mises stresses were found in design 2. Regarding von-Mises stresses on the residual ridge, the lowest Von Mises stresses were found in design 4, followed by design 3, then design 2, while the highest Von Mises stresses were found in design 1. CONCLUSIONS: The attachment retained RPD with a conventional design offered the lowest stresses applied for the abutment and the residual ridge. OT cap attachment exerts the least stress on the abutments when used in unilateral design RPD, so it is preferable for abutment preservation but contraindicated in weak ridges, however, the double OT cap exerts the highest amount of force on the abutment teeth and could be used with abutments showing perfect periodontal condition.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
Khalil完成签到,获得积分10
刚刚
2秒前
3秒前
5秒前
煜猪猪完成签到,获得积分10
5秒前
5秒前
necos发布了新的文献求助10
6秒前
chiaugustus发布了新的文献求助10
7秒前
yy完成签到,获得积分10
8秒前
隐隐完成签到,获得积分10
8秒前
zww发布了新的文献求助10
8秒前
9秒前
生尽证提发布了新的文献求助10
9秒前
9秒前
11秒前
核桃发布了新的文献求助10
12秒前
13秒前
lin完成签到,获得积分10
14秒前
德烁发布了新的文献求助10
14秒前
14秒前
14秒前
无极微光的应助被zxh_采纳,获得20
15秒前
15秒前
16秒前
17秒前
虚拟的觅山完成签到,获得积分10
17秒前
残忆思发布了新的文献求助30
18秒前
18秒前
chiaugustus完成签到,获得积分20
18秒前
所所的应助被竹蜻蜓采纳,获得10
18秒前
zhao完成签到,获得积分0
18秒前
xxxx发布了新的文献求助10
19秒前
19秒前
月白发布了新的文献求助10
19秒前
19秒前
Kunpeng发布了新的文献求助30
19秒前
秋秋完成签到,获得积分10
20秒前
yaoji发布了新的文献求助10
20秒前
dh发布了新的文献求助10
21秒前
zyx完成签到,获得积分10
21秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8192903
求助须知:如何正确求助?哪些是违规求助? 9579325
关于积分的说明 21864493
捐赠科研通 7792494
什么是DOI,文献DOI怎么找? 3437087
关于科研通互助平台的介绍 2560652
邀请新用户注册赠送积分活动 2483937