Numerical Comparison of TPMS Structures for the Design of an Automotive Engine Oil Cooler

汽车工业 汽车工程 汽车发动机 计算机科学 机械工程 工程类 航空航天工程
作者
Federico Torri,Fabio Berni,Lorenzo Martoccia,Alessandro Marini,Andrea Merulla,Mauro Giacalone,Giulia Colombini
出处
期刊:SAE technical paper series [SAE International]
卷期号:1 被引量:3
标识
DOI:10.4271/2025-01-8155
摘要

Triply Periodic Minimal Surface (TPMS) structures offer the possibility of reinventing structural parts and heat exchangers to obtain higher efficiency and lighter or even multi-functional components. The crescent global climate concern has led to increasingly stringent emissions regulations and the adoption of TPMS represents a resourceful tool for OEMs to downsize and lighten mechanical parts, thereby reducing the overall vehicle weight and the fuel consumption. In particular, TPMS structures are gaining growing interest in the heat exchanger field as their morphology allows them to naturally house two separate fluids, thus ensuring heat transfer without mixing. Moreover, TPMS-based heat exchangers can offer countless possible design configurations. These structures are obtained by periodic repetitions in the three spatial dimensions of a specific unit cell with defined dimensions and wall thickness. By tuning their characteristic parameters, the structure can be tailored to obtain the desired weight, surface-to-volume ratio and strength. In the light of this, the paper provides a numerical comparison between two different unit cell types and four different unit cell dimensions to identify the most suitable parameter combination of a water-engine oil heat exchanger exploiting a TPMS structure. Based on previous work, the Gyroid and Diamond cell types are considered as the most promising structures, while the considered cell dimensions are 5, 6, 8 and 12 mm. For a fair comparison, the specimens share the same volume and wall thickness, which is chosen to minimize thermal conductive resistance and concurrently is the minimum value required by technological and structural requirements. The specimens are tested at four mass flow rate combinations of engine oil and water, representative of an automotive oil cooler. Finally, the structures are compared in terms of the computed pressure drops and heat transfer. In addition, a plate-fin heat exchanger with turbulators is added to the comparison to discuss the potentials of this innovative structures with respect to conventional solutions.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
打打的应助被漂亮冰薇采纳,获得10
2秒前
果子大完成签到,获得积分10
2秒前
木子完成签到,获得积分10
3秒前
YDYD完成签到 ,获得积分10
3秒前
3秒前
3秒前
李李鱼完成签到 ,获得积分10
4秒前
4秒前
arT完成签到,获得积分10
4秒前
7秒前
果子大发布了新的文献求助10
8秒前
黄毛虎发布了新的文献求助10
9秒前
小升初发布了新的文献求助10
10秒前
小二郎的应助被zzz采纳,获得10
11秒前
Sidney完成签到 ,获得积分10
11秒前
12秒前
酷炫小甜瓜完成签到 ,获得积分10
12秒前
学阿斗完成签到,获得积分10
12秒前
迷路的忆之完成签到,获得积分10
12秒前
锂离子发布了新的文献求助10
13秒前
liuzhanyu发布了新的文献求助30
14秒前
15秒前
16秒前
知性的藏鸟完成签到 ,获得积分10
16秒前
华圣拿下巨蜥完成签到,获得积分10
17秒前
18秒前
19秒前
大力的可乐完成签到,获得积分10
20秒前
echowang完成签到,获得积分10
20秒前
小蘑菇的应助被zenghong采纳,获得10
22秒前
23秒前
华仔的应助被daipeng采纳,获得10
24秒前
三语掾发布了新的文献求助10
24秒前
昕昕233发布了新的文献求助10
24秒前
可爱的函函的应助被dangdindong采纳,获得10
26秒前
雪中漫步发布了新的文献求助10
27秒前
执着新竹完成签到,获得积分10
27秒前
房同学完成签到,获得积分10
27秒前
27秒前
橘子味完成签到 ,获得积分10
28秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8186819
求助须知:如何正确求助?哪些是违规求助? 9575195
关于积分的说明 21839872
捐赠科研通 7784526
什么是DOI,文献DOI怎么找? 3434849
关于科研通互助平台的介绍 2559266
邀请新用户注册赠送积分活动 2481716