钙矾石
铝酸盐
石膏
过饱和度
相(物质)
化学
水泥
波特兰岩
摩尔比
化学工程
材料科学
无机化学
硅酸盐水泥
有机化学
复合材料
催化作用
工程类
作者
Wojciech Szudek,Jakub Szydłowski,Ilona Buchała,Ewa Kapeluszna
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2024-10-26
卷期号:17 (21): 5216-5216
被引量:45
摘要
The goal of the presented work was to find the most favorable conditions for the synthesis and stabilization of chemically pure ettringite and monosulfate. The reaction was carried out by mixing pure tricalcium aluminate (C3A) and gypsum (CS¯H2) in an excess amount of water. The impact of hydration time (2–7 days), C3A:CS¯ molar ratio (1:1–1:3) and water vapor pressure of the selected drying agents (anhydrite-III and supersaturated CaCl2 solution) on the phase composition of the products was evaluated. After 7 days of hydration, either ettringite or monosulfate was obtained as the main product, depending on the C3A:CS¯ molar ratio. The synthesis carried out at a C3A:CS¯ molar ratio of 1:3 produced pure ettringite. In the case of the sample characterized by the ratio of 1:1 (typical of monosulfate), a considerable portion of ettringite (27.9%) was present in the final products along the AFm phase. Therefore, a different synthesis method has to be selected in order to obtain pure monosulfate. The results showed that thermal analysis, X-ray diffractometry and FTIR spectroscopy can be used to distinguish the characteristic features of ettringite and monosulfate.
科研通智能强力驱动
Strongly Powered by AbleSci AI