The epoxy and hydroxyl-terminated liquid nitrile rubber-modified bisphenol A cyanate ester adhesives was prepared.The effects of catalyst dibutyltin dilaurate on the adhesive curing behavior,curing product structure,heat resistance and mechanical properties were investigated by FT-IR,DSC,TGA and DMA.The results showed that the curing degree at 140 ℃ of cyanate ester adhesive adding catalyst was 88.7%.The T g of cured product reached 199.4 ℃ and 5% weight loss temperature(T d5) was 344.7 ℃.The shear strength at 25 ℃,150 ℃ and 200 ℃ was 29.4 MPa,27.7 MPa and 20.0 MPa,respectively and the strength retention rate at 150 ℃ and 200 ℃ was 94.2% and 68.0%,respectively.The adhesives had storage stability and still had good mechanical strength at room temperature and high temperature after placed at 25 ℃ for 50 d.