材料科学
纳米颗粒
化学工程
石墨烯
氧化物
硫黄
纳米技术
溶解
钛
阴极
碳纤维
电解质
多硫化物
锂(药物)
无机化学
电极
复合材料
化学
复合数
冶金
工程类
医学
内分泌学
物理化学
作者
Xiaonan Shang,Pengqian Guo,Tianfeng Qin,Mengting Liu,Mingzhi Lv,Dequan Liu,Deyan He
标识
DOI:10.1002/admi.201701602
摘要
Abstract Lithium–sulfur (Li–S) batteries are the promising candidate for future energy storage systems due to their high specific capacities and energy densities. However, shuttle effect of the soluble polysulfides severely affects the cycle stability and thus restricts the application of the batteries. Here, a preparation of the titanium oxide (TiO2) nanoparticles uniformly deposited on hierarchical porous carbon (HPC@TiO2) as an efficient sulfur host is reported. The large specific surface area (1016.5 m2 g−1) and high pore volume of the HPC@TiO2 host can buffer the volume expansion of the loaded sulfur. The HPC@TiO2@S cathode is further wrapped with the TiO2 nanoparticles interspersed graphene sheets (G/TiO2), which can improve the electrical conductivity of the electrode and suppress the dissolution of polysulfides. As a result, polysulfides are well confined in the G/TiO2‐coated HPC@TiO2@S cathode through a synergistic combination of the G/TiO2 coating and the HPC@TiO2 host. The resultant G/TiO2‐coated HPC@TiO2@S cathode with a sulfur loading about 2.4 mg cm−2 delivers a high reversible capacity of ≈919 mAh g−1 after 80 cycles at 0.2 C, and a satisfactory capacity of ≈717 mAh g−1 is retained after 200 cycles at 0.5 C.
科研通智能强力驱动
Strongly Powered by AbleSci AI