The Effect of Adhesive Layer Thickness on Joint Static Strength

胶粘剂 材料科学 接头(建筑物) 对接接头 复合材料 搭接接头 剪切(物理) 压力(语言学) 图层(电子) 结构工程 语言学 哲学 冶金 工程类
作者
Marek Rośkowicz,Jan Godzimirski,Andrzej Komorek,Michał Jasztal
出处
期刊:Materials [Multidisciplinary Digital Publishing Institute]
卷期号:14 (6): 1499-1499 被引量:53
标识
DOI:10.3390/ma14061499
摘要

One of the most relevant geometrical factors defining an adhesive joint is the thickness of the adhesive layer. The influence of the adhesive layer thickness on the joint strength has not been precisely understood so far. This article presents simplified analytical formulas for adhesive joint strength and adhesive joint coefficient for different joint loading, assuming, inter alia: linear-elastic strain of adhesive layer, elastic strain of adherends and only one kind of stress in adhesive. On the basis of the presented adhesive joint coefficient, the butt joint was selected for the tests of the influence of adhesive thickness on the adhesive failure stress. The tests showed clearly that with an increase in the thickness of the tested adhesive layers (up to about 0.17 mm), the value of their failure stress decreased quasi linearly. Furthermore, some adhesive joints (inter alia subjected to shearing) may display the optimum value of the thickness of the adhesive layer in terms of the strength of the joint. Thus, the aim of this work was to explain the phenomenon of optimal adhesive layer thickness in some types of adhesive joints. The verifying test was conducted with use of single simple lap joints. Finally, with the use of the FE method, the authors were able to obtain stresses in the adhesive layers of lap joints for loads that destroyed that joints in the experiment, and the FEM-calculated failure stresses for lap joints were compared with the adhesive failure stresses determined experimentally using the butt specimens. Numerical calculations were conducted with the use of the continuum mechanics approach (stress-based), and the non-linear behavior of the adhesive and plastic strain of the adherends was taken into account.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
动听的秋灵完成签到,获得积分10
刚刚
酸甜完成签到,获得积分10
刚刚
爆米花的应助被Bilibala采纳,获得10
刚刚
1秒前
lixm316完成签到,获得积分10
1秒前
sink发布了新的文献求助10
1秒前
Flyzhang完成签到,获得积分10
1秒前
毛果果发布了新的文献求助10
1秒前
1秒前
1秒前
派先生丶的应助被cc采纳,获得10
1秒前
科研通AI2S的应助被时尚丸子采纳,获得10
1秒前
111完成签到,获得积分10
2秒前
研友_wZr5Rn发布了新的文献求助10
2秒前
无语的怜梦完成签到,获得积分10
2秒前
zad完成签到,获得积分10
2秒前
甜甜的契完成签到,获得积分10
2秒前
l895365038发布了新的文献求助10
3秒前
3秒前
huimin发布了新的文献求助10
3秒前
wangjian完成签到,获得积分10
3秒前
ksduoiwex完成签到,获得积分10
4秒前
就是好命完成签到,获得积分10
4秒前
4秒前
共享精神的应助被小杰采纳,获得10
4秒前
Akim的应助被调皮枫叶采纳,获得10
4秒前
霍双帅完成签到 ,获得积分10
4秒前
4秒前
wanci的应助被tinna采纳,获得10
4秒前
4秒前
曼波发布了新的文献求助30
4秒前
淡然妙松完成签到,获得积分10
4秒前
跳跃黄豆完成签到 ,获得积分10
5秒前
多鱼完成签到 ,获得积分10
5秒前
5秒前
aprilvanilla完成签到,获得积分10
5秒前
5秒前
无辜的薯片完成签到,获得积分10
5秒前
甜甜圈完成签到,获得积分20
5秒前
5秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1500
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
Analyses de reconnaissances de dettes passées devant les échevins d'Ypres (1249-1291) 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8159581
求助须知:如何正确求助?哪些是违规求助? 9555100
关于积分的说明 21724719
捐赠科研通 7749543
什么是DOI,文献DOI怎么找? 3427281
关于科研通互助平台的介绍 2552278
邀请新用户注册赠送积分活动 2471619