材料科学
锡
无定形固体
相(物质)
碳纤维
溅射沉积
摩擦学
复合材料
冶金
基质(化学分析)
弹性模量
复合数
溅射
薄膜
纳米技术
结晶学
化学
有机化学
作者
Rui Zhou,Hongbo Ju,Shijia Liu,Zitong Zhao,Junhua Xu,Lihua Yu,Hongliang Qian,Shangyi Jia,Renbo Song,Jun Shen
出处
期刊:Vacuum
[Elsevier BV]
日期:2021-10-30
卷期号:196: 110719-110719
被引量:35
标识
DOI:10.1016/j.vacuum.2021.110719
摘要
A radio frequency magnetron sputtering system was used to add Ag into the TiCN matrix to improve its tribological properties at room and elevated temperatures. The results showed that the TiCN–Ag composite film with different Ag content was composed of four phases: face centered cubic (fcc) TiN phase, fcc-Ag phase, amorphous carbon, carbon nitride phases. Adding soft silver phase into the matrix decreased both hardness and elastic modulus. However, the addition of Ag improved the film's friction and wear properties at room and elevated temperatures due to the lubricating performance of Ag. • Films exhibited four phases of fcc-TiN, fcc-Ag, amorphous carbon and carbon nitride. • Increasing in the grain boundaries induced by adding Ag enhanced the critical adhesion load to 14.5 N. • Addition of Ag could improve the friction and wear properties at room and elevated temperatures.
科研通智能强力驱动
Strongly Powered by AbleSci AI