材料科学
复合材料
低温
抗弯强度
脆性
复合材料层合板
刚度
压力(语言学)
弯曲
复合数
抗弯刚度
纤维增强塑料
失效机理
机制(生物学)
三点弯曲试验
纤维
抗弯刚度
应力集中
巴(单位)
弯曲模量
作者
Qianying Cen,Yicheng Jiang,Xueqin Luo,Wenjin Zhang,Tianyue Xia,Ling Liu,Zhanjun Wu
摘要
ABSTRACT This study investigates cryogenic flexural failure mechanisms of carbon fiber/epoxy composites using an experimentally validated multiscale simulation framework. A novel approach based on temperature‐dependent stress amplification factors (SAFs) is developed to bridge the micro‐ and macro‐mechanical behaviors under three‐point bending from room temperature down to −183°C. The framework, derived from a three‐phase unit‐cell model, enables bidirectional stress transfer and dynamic stiffness degradation. Excellent agreement is achieved between simulated and experimental force‐displacement responses for both unidirectional and cross‐ply laminates. Results demonstrate a significant cryogenic strengthening effect, with flexural strength increases significantly at cryogenic temperatures: unidirectional laminates gain 29.37% (−55°C) and 62.24% (−183°C), whereas cross‐ply laminates show improvements of 17.07% and 29.27%, relative to room temperature. Simulations identify regions with minimal fiber‐spacing as damage‐sensitive zones, where SAFs intensifies at low temperatures. Microscopic damage initiates at the fiber/matrix interface, with cryogenic conditions delaying its onset. Both architectures undergo progressive failure: interfacial debonding, matrix damage, and finally fiber fracture. Macroscopically, cooling shifts unidirectional laminates from ductile to brittle fiber‐dominated failure, whereas cross‐ply laminates transition from a pseudo‐ductile response driven by interlaminar stiffness mismatch, to brittle interlaminar failure. These insights provide a reliable foundation for the design of cryogenic composite components.
科研通智能强力驱动
Strongly Powered by AbleSci AI