偏转(物理)
Crystal(编程语言)
坩埚(大地测量学)
限制
硅
材料科学
微下拉
热的
晶体生长
机械
压力(语言学)
复合材料
化学
光学
结晶学
机械工程
热力学
物理
光电子学
工程类
计算机科学
哲学
计算化学
程序设计语言
语言学
作者
Jochen Friedrich,Thomas Josef Jung,M. Trempa,Christian Reimann,Alexey Denisov,Andreas Muehe
标识
DOI:10.1016/j.jcrysgro.2019.125168
摘要
In this contribution numerical modeling was used to investigate the limitations of the growth speed during pulling of silicon crystals by the Czochralski technique with weights of up to 300 kg in crucibles with up to 26″ diameter for PV applications. It will be shown that in a first approximation there is a linear dependence of the deflection of the solid-liquid interface on the pull speed. It is confirmed by the modeling results that the phenomenon of the so-called crystal twisting, where the crystal loses its cylindrical shape, is mainly limiting the pull speed. In all calculated cases it occurs obviously with higher probability if the deflection of the solid-liquid interface exceeds 2 cm. Other factors like thermal stress in the crystal or the requirement to achieve a completely vacancy rich material are not limiting the pull speed. Further, it is shown that the pull speed limit for growing a 210 mm crystal without twisting can be increased up to 1.8 mm/min by using an optimized active crystal cooler. In order to increase the pull speed further two generic measures are proposed: (i) increase of heat removal through the crystal and (ii) lowering the temperature at crucible bottom. It will be shown that both measures can lead to a decrease of the interface deflection for a given pull speed. This means that there is the potential to increase the pull speed further to 2 mm/min and beyond before crystal twisting will take place. This enhancement of the pull speed corresponds to an increase of the productivity of the Cz process in the optimized puller by 54% compared to the original one without active crystal cooler.
科研通智能强力驱动
Strongly Powered by AbleSci AI