气相二氧化硅
材料科学
环氧树脂
涂层
复合数
复合材料
钠
核化学
沉浸式(数学)
化学工程
化学
冶金
数学
纯数学
工程类
作者
Liben Zhou,Xiaodong Wang,Xuan-Xuan Zhao,Jian Dai,Yue Wang,Weijie Guo,Zhaolei Li,Weili Li
标识
DOI:10.1016/j.porgcoat.2022.107307
摘要
In this paper, based on the loading of the corrosion inhibitor 2-chloromethylbenzimidazole (2-CBI) into polyporous fumed silica (FS) and following sequential deposition of poly(sodium-p-styrenesulfonate) (PSS) and polyethyleneimine (PEI) onto the surface of the loaded FS (PEI-PSS-2CBI-FS), a pH-stimulated filler was manufactured. Later, a composite coating (EP-PEI-PSS-2CBI-FS) was prepared by adding PEI-PSS-2CBI-FS into the epoxy resin. The results showed that when the scratched EP- PEI-PSS-2CBI-FS was immersed in a 3.5 wt% NaCl solution with pH = 2.0, it can continuously release 2-CBI. Compared to pure epoxy coating (EP) and epoxy coating with crude FS (EP-FS) as filler, the impedance value of scratched EP-PEI-PSS-2CBI-FS in a 3.5 wt% NaCl solution with pH = 2.0 gradually increased with immersion time, showing a clear self-healing behavior. Most importantly, the impedance value of the scratched EP-PEI-PSS-2CBI-FS gradually increased during immersion in a 3.5 wt% NaCl solution with a lower pH (0.5 and 2.0) rather than decreased when pH = 4.0 and pH = 7.0. The EP-PEI-PSS-2CBI-FS coating exhibits well-defined pH stimulus responsive ability.
科研通智能强力驱动
Strongly Powered by AbleSci AI