微观结构
材料科学
铜
极限抗拉强度
堆积
表面粗糙度
叠加断层
聚乙二醇
表征(材料科学)
复合材料
表面光洁度
冶金
晶界
Crystal(编程语言)
位错
化学工程
纳米技术
化学
计算机科学
工程类
有机化学
程序设计语言
作者
Jian Huang,Ning Song,Mingwei W. Chen,Yun‐Zhi Tang,Xiao‐Wei Fan
出处
期刊:RSC Advances
[Royal Society of Chemistry]
日期:2024-01-01
卷期号:14 (51): 38268-38278
被引量:33
摘要
Additives serve as a crucial means of enhancing the performance of electrodeposited copper foil. Here we electrodeposited a high-quality copper foil with high tensile and low surface roughness, using a single additive, polyethylene glycol (PEG). We analyzed the impact of varying concentrations of PEG on the surface morphology and mechanical characteristics of copper foil. The results indicated that the prepared copper foil exhibited the greatest tensile strength (433.2MPa) and the roughness (Rz) was reduced to 1.7μm when the PEG concentration was 4mg/L. Furthermore, the 4mg/L PEG concentration promoted the preferred orientation of copper foil (220) crystal planes. Additionally, at this concentration, the proportion of ∑3 twins in the copper foil increased to 51.9%, and the twin boundaries were reinforced by the formation of cambium faults. Moreover, based on the influence of PEG concentration on copper foil, adsorption models of different concentrations of PEG during the electrodeposition process were established.
科研通智能强力驱动
Strongly Powered by AbleSci AI