Application and practice of LILCEO sintering proportion optimization algorithm in sintering plant

Purpose To ensure the stable operation of ironmaking process and the quality and output of sinter, the multi-objective optimization of sintering machine batching process was carried out. Design/methodology/approach The purpose of this study is to establish a multi-objective optimization model with iron taste content and batch cost as targets, constrained by field process requirements and sinter quality standards, and to propose an improved balance optimizer algorithm (LILCEO) based on a lens imaging anti-learning mechanism and a population redundancy error correction mechanism. In this method, the lens imaging inverse learning strategy is introduced to initialize the population, improve the population diversity in the early iteration period, avoid falling into local optimal in the late iteration period and improve the population redundancy error correction mechanism to accelerate the convergence rate in the early iteration period. Findings By selecting nine standard test functions of BT series for simulation experiments, and comparing with NSGA-?, MOEAD, EO, LMOCSO, NMPSO and other mainstream optimization algorithms, the experimental results verify the superior performance of the improved algorithm. The results show that the algorithm can effectively reduce the cost of sintering ingredients while ensuring the iron taste of sinter, which is of great significance for the comprehensive utilization and quality assurance of sinter iron ore resources. Originality/value An optimization model with dual objectives of TFe content and raw material cost was developed taking into account the chemical composition and quality indicators required by the blast furnace as well as factors such as raw material inventory and cost constraints. This model was used to adjust and optimize the sintering raw material ratio. Addressing the limitations of existing optimization algorithms for sintering raw materials including low convergence accuracy slow speed limited initial solution production and difficulty in practical application we proposed the LILCEO algorithm. Comparative tests with NSGA-III MOEAD EO LMOCSO and NMPSO algorithms demonstrated the superiority of the proposed algorithm. Practical applications showed that the proposed method effectively overcomes many limitations of the current manual raw material ratio model providing scientific and stable decision-making guidance for sintering production operations.