材料科学
因科镍合金
沉积(地质)
极限抗拉强度
延展性(地球科学)
冶金
气体保护金属极电弧焊
复合材料
弧(几何)
高温合金
开裂
合金
焊接
热影响区
机械工程
蠕动
生物
沉积物
古生物学
工程类
作者
Renan Medeiros Kindermann,M.J. Roy,Roberto Morana,J. A. Francis,Philip B. Prangnell
标识
DOI:10.1016/j.addma.2023.103765
摘要
Directed energy deposition via electric arc (DED-Arc) and wire-feed system can offer a low-cost, high deposition rate method to produce large-scale, near-net-shape structural components from Inconel 718 (IN718). In this work, DED-Arc with cold metal transfer (CMT) has been compared with pulsed-spray droplet transfer (GMAW-P) using different build strategies by correlating the local cyclic thermal histories and the position of deposition interruptions to the resulting tensile properties. The measured heat input (0.18 – 0.59 kJ/mm) and inter-pass temperature (80 – 650 °C) affected the thermal field and residence times in the 900 – 600 °C temperature range, where γ’/γ” phases are more likely to form, thereby impacting the yield strength along the build direction (370 – 460 MPa). Furthermore, CMT deposition with a lower travel speed (0.4 m/min vs. 1.0 m/min) prevented the onset of solidification defects, contributing to more consistent tensile ductility. Tensile properties of material surrounding build interruptions developed strain localisation and failed prematurely as compared to regions without, due to localised cracking and transient thermal fields generated once the deposition resumed. The data that support the findings of this study are available from the corresponding author upon request.
科研通智能强力驱动
Strongly Powered by AbleSci AI