材料科学
胶粘剂
有限元法
拉伤
复合材料
剪应力
光纤
纤维
干涉测量
图层(电子)
传输(计算)
剪切(地质)
光学
结构工程
计算机科学
工程类
物理
并行计算
医学
内科学
作者
Kai Tai Wan,Christopher K.Y. Leung,Noah G. Olson
标识
DOI:10.1088/0964-1726/17/3/035037
摘要
The relation between the component strain and the strain on a surface-attached optical fiber is governed by the effectiveness of shear transfer through the adhesive and the polymeric coating(s) on the optical fiber. A classical shear lag model can predict the strain transfer through a soft layer well. However, experiments showed that the results are unsatisfactory for bare fiber with stiff adhesive case. A 3D-FEM is established to model the strain transfer of a surface-mounted strain sensor and it is verified by experiments. Then, it is used to investigate the influence of four geometric parameters of the adhesive: (1) side width, (2) top thickness, (3) bond length, (4) bottom thickness, on the strain transfer. By sensitivity analysis, it is revealed that the bond length and the bottom thickness are dominant factors. Based on finite element results, the parameter of the analytical model is modified to suit stiff layer cases. Important considerations for practical installation of surface-attached optical interferometric and FBG strain sensors will be discussed.
科研通智能强力驱动
Strongly Powered by AbleSci AI