QUALITY CONTROL IN SURGERY: APPLICATION TO COMPUTER-ASSISTED SURGERY

作者
Rémy Nizard,Raphaël Porcher,Philippe Ravaud,Edouard Vangaver,L. Sedel
出处
期刊:
链接
摘要

Purpose: Surgical techniques must be evaluated before proceeding with widespread use. The evaluation system is usually copied after that used for drugs, relying on randomised trials. This system fails however to assess one dimension, i.e. quality control. The purpose of the present study was to demonstrate the usefulness of an evaluation technique taking into account the capacity to control the quality of a surgical procedure and determine the reliability, reproducibility, and controllability of the technique. This method of evaluation was applied to computer-assisted surgery for total knee arthroplasty. Material and methods: Computer-assisted surgery based on 3D bone reconstruction was used for 78 knees. The main outcome assessment criterion was the mechanical axis from the centre of the femoral head to the centre of the ankle. The desired alignment was between 3° varus and 3° valgus. Alignments were measured continuously by an independent operator. A Cusum curve was drawn over time and tested after each operation to determine whether the procedure under evaluation could be continued. The same method was applied to the position of the individual femoral and tibial implants setting the limits at two degrees around the perpendicular mechanical axis (AP view). Results: The mechanical axis was between 3° varus and 3° valgus in 91% of the knees. The continuous evaluation curve showed that the procedure was under control throughout the trial. There was a learning curve that plateaued at 27 knees. Evaluation of the position of the individual implants showed a trend towards femur valgus over time which was compensated by a trend towards tibial varus. Discussion: Industrial quality control procedures are well established and widely used. The goal of this work was to apply the same quality control methodology to a surgical procedure. Before undertaking a randomised trial this type of evaluation can affirm that the procedure is well controlled and that using an innovating technique under these conditions does not expose patients to undue risks.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
iI发布了新的文献求助10
1秒前
杲杲杳杳完成签到 ,获得积分10
2秒前
2秒前
3秒前
LJK完成签到,获得积分10
3秒前
3秒前
成成发布了新的文献求助30
3秒前
4秒前
melon完成签到,获得积分10
5秒前
5秒前
5秒前
zzznuo完成签到,获得积分10
5秒前
5秒前
哇卡哇卡完成签到,获得积分10
5秒前
7秒前
7秒前
8秒前
8秒前
Pan完成签到,获得积分10
8秒前
8秒前
研友_5AXZ85发布了新的文献求助10
8秒前
斯文败类的应助被Yu采纳,获得10
8秒前
9秒前
9秒前
9秒前
wcy发布了新的文献求助10
10秒前
TT发布了新的文献求助10
10秒前
10秒前
10秒前
NN发布了新的文献求助10
11秒前
11秒前
猫与咖啡完成签到,获得积分10
12秒前
Starlight发布了新的文献求助10
12秒前
12秒前
lilililili发布了新的文献求助10
12秒前
张艳发布了新的文献求助10
12秒前
13秒前
Chan发布了新的文献求助10
13秒前
Uynaux完成签到,获得积分10
13秒前
14秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
Energie-Contracting 1500
Spec 401: Standards for Jet Fuel Facility and Equipment Commissioning and Flushing at Airports, 2026.1 (Original Issue) 1000
Spec 103: Standard for Jet Fuel Quality Control at Airports, Revision 2026.1 1000
Mathematical models in hydrology 1000
Klimaschutzrecht durch den Energiesektor im Mehrebenensystem – Ein Rechtsvergleich 1000
Erzählte Gnade 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8087056
求助须知:如何正确求助?哪些是违规求助? 9500651
关于积分的说明 21420707
捐赠科研通 7658431
什么是DOI,文献DOI怎么找? 3403473
关于科研通互助平台的介绍 2532291
邀请新用户注册赠送积分活动 2441948