已入深夜,您辛苦了!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您度过漫漫科研夜!祝你早点完成任务,早点休息,好梦!

Automated Optical Inspection (AOI) for FOPLP with Simultaneous Die Placement Metrology

作者
Burhan Ali,Mike Marshall
出处
期刊:IMAPS symposia and conferences [International Microelectronics Assembly and Packaging Society]
卷期号:2019 (1): 000203-000210 被引量:2
标识
DOI:10.4071/2380-4505-2019.1.000203
摘要

Abstract As the final step of IC fabrication, packaging is the process to encapsulate the chip and provide the interconnections for the I/O of the final form factor. The demand for increasingly higher I/O density, shrinking device size and lower cost that drive wafer processing also apply to the packaging process. Various technologies have been developed in order to achieve these goals with most of them being wafer-level packaging (WLP). Unlike traditional packaging process, most I/O interconnections are done at the wafer-level with redistribution layers (RDLs). RDLs are the layer where copper lines and vias form the electrical connections. Depending on the applications' market such as mobile, memory or the Internet of Things (IoT), fan-out wafer level packaging (FOWLP) provides the most promising method to support the I/O density requirements and fine RDL line/space. Moreover, fan-out panel level packaging (FOPLP) was also developed in order to capitalize on economies of scale and optimize substrate utilization. In this technology, a rectangular substrate is used in the process instead of a round-shape substrate like a wafer. Processes and equipment have long been developed for the wafer substrate market, but the previous developments cannot be directly applied to panel substrates. For instance, in the wafer line, spin on processes are very prevalent but these are not at all practical for a panel line. Some capital equipment manufacturers have been reluctant to embrace panel-level manufacturing due to the uncertainty as to whether it will prevail. Struggles with yield have been very common; some of which are due to die placement and others due to the lack of process control capabilities. With the explosion and adoption of FOWLP to enhance package shrinkage and performance the panel market becomes more and more viable. The companies that have embraced panel level manufacturing from the beginning have a distinct advantage due to their intimate knowledge and experience with the substrates as well as the relationship developed with capital equipment suppliers to develop the necessary technology in order to process the panels. However, there is still a great need to ensure the product mix deployed in panel form can have an acceptable yield; automated optical inspection and die placement metrology bridge that gap. Automated optical inspection allows for defect detection with traditional bright field (BF) or dark field (DF) illumination and also a new novel illumination technique that enables the detection of organic particles and/or residues that are often used in panel-level packaging processes. A system capable of macro defect detection with sub-micron capabilities allows for multi-purpose panel inspections. The system is also equipped with metrology capabilities for critical dimension and die placement measurements which meet the process node dimensional requirements. These features allow for process control of pick and place, overlay as well as feed-forward capabilities for die placement corrections. In a FOWLP/FOPLP process, chip first and chip last can be concluded among all available methods in the market. Die placement either start from the initial phase of the process or in the final phase of the process. In the chip first scenario, the chips are placed on a carrier by a pick-and-place system and then followed by an encapsulating molding process to reconstitute a substrate (reconstituted wafer or reconstituted panel). At this point a semi-additive process (SAP) is typically followed which includes a photo resist layer being coated, exposed and developed following copper (Cu) plating in order to form the redistribution layer. In this workflow, the die position are dominated by the accuracy of the pick-and-place tool and coefficient of thermal expansion (CTE) mismatch of the molding material and carrier. The trade-off between throughputs, placement accuracy and a feedback mechanism is the main impact from the pick-and-place tool in this process step. This affects both the chip first and chip last scenarios. The thermal expansion of the molding process not only adds additional die shift but also causes warpage of the reconstituted substrate that becomes an issue for automated handling systems and local process variation. Therefore, to know the actual die position and orientation after the die placement and molding process is crucial for matching with the following redistribution layers development. In one scenario it is possible to utilize the lithography system to perform die position metrology, however, this is time consuming and impacts the cost of ownership and overall throughput for the lithography process. A solution to this problem is provided by implementation of an optical metrology system. Since this information needs to be passed to the lithography tool in a usable manner for variable exposure positioning, the alignment of the stage coordinate system between the die metrology tool and lithography tool is a key point to ensure the correctness of the feed forward loop. For RDL development overlay between die and RDL via directly impact yield and are just as critical to the process as defect inspection and critical dimension measurements. Based on the corrections for each die, a yield prediction can be made and provides different strategies for the lithography tool's exposure field in order to balance throughput and exposure yield rate. In this paper, we demonstrate a solution using an automatic optical inspection (AOI) system to perform the die metrology for chip placement and RDL development in FOPLP and FOWLP. This includes die shift, die rotation, RDL inspection as well as the overlap between a reconstituted substrate and RDLs. This solution provides comprehensive coverage for packaging process control and significantly impacts yield optimization and throughput enhancement. With a multifunctional AOI system, it also reduces the cost of ownership for packaging processes.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
嘎嘎强手的应助被Panda采纳,获得10
刚刚
kk完成签到 ,获得积分20
1秒前
1秒前
毛头发布了新的文献求助10
3秒前
3秒前
4秒前
余音缭绕完成签到,获得积分10
4秒前
Hello的应助被bobo呀采纳,获得10
4秒前
龙傲天发布了新的文献求助10
6秒前
嘻嘻哈哈的应助被科研通管家采纳,获得10
6秒前
SciGPT的应助被科研通管家采纳,获得10
6秒前
科目三的应助被科研通管家采纳,获得10
6秒前
汉堡包的应助被科研通管家采纳,获得10
6秒前
安详岱周发布了新的文献求助10
6秒前
天天快乐的应助被科研通管家采纳,获得30
6秒前
共享精神的应助被科研通管家采纳,获得10
6秒前
彭于晏的应助被科研通管家采纳,获得10
6秒前
科研通AI2S的应助被科研通管家采纳,获得10
7秒前
斯文败类的应助被科研通管家采纳,获得10
7秒前
完美世界的应助被科研通管家采纳,获得10
7秒前
Orange的应助被科研通管家采纳,获得10
7秒前
打打的应助被科研通管家采纳,获得10
7秒前
大模型的应助被科研通管家采纳,获得10
7秒前
无花果的应助被科研通管家采纳,获得30
7秒前
共享精神的应助被科研通管家采纳,获得10
8秒前
顾矜的应助被科研通管家采纳,获得10
8秒前
科研通AI2S的应助被科研通管家采纳,获得10
8秒前
8秒前
汉堡包的应助被科研通管家采纳,获得10
8秒前
香蕉觅云的应助被科研通管家采纳,获得10
8秒前
lisasasasa完成签到,获得积分10
8秒前
传奇3的应助被科研通管家采纳,获得10
8秒前
奔跑的应助被科研通管家采纳,获得10
8秒前
彭于晏的应助被科研通管家采纳,获得10
9秒前
嘻嘻哈哈的应助被科研通管家采纳,获得10
9秒前
9秒前
9秒前
kk关注了科研通微信公众号
10秒前
Zhe完成签到 ,获得积分10
11秒前
上官若男的应助被安详岱周采纳,获得10
12秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8194529
求助须知:如何正确求助?哪些是违规求助? 9580304
关于积分的说明 21870538
捐赠科研通 7794101
什么是DOI,文献DOI怎么找? 3437711
关于科研通互助平台的介绍 2560986
邀请新用户注册赠送积分活动 2484393