Preparation and construction mechanism of thermal conductive epoxy‐based composite via magnetic field induced orientation

Abstract BN was modified with Fe 3 O 4 to confer it with paramagnetic responsivity. The scanning electron microscopy and energy dispersive spectrometer (EDS) results demonstrated that with the assistance of an external magnetic field, the paramagnetic BN particles within an epoxy matrix are effectively aligned along the direction of the magnetic field during the curing process of epoxy resin, hence forming continuous thermal conduction pathways. Therefore, the thermal conductivity of the epoxy‐based composite filled with 30 wt% of BN and externally applied with a 50 mT magnetic flux density was 0.7417 (W/m·K), an improvement of 207.89% relative to the pure epoxy resin. The establishment of continuous thermal pathways facilitates effective phonon conduction, thereby further enhancing the thermal conductivity of the material. Meanwhile, this study investigates the chain formation mechanism of Fe 3 O 4 ‐modified BN under the influence of a magnetic field. When subjected to an applied magnetic field, the magnetic BN embedded in an epoxy resin matrix undergoes magnetization, rotation, and contact. Subsequently, multiple particles initially form short chains, then aggregate into longer chains aligned with the direction of the magnetic field. The findings indicate that the magnetic field induced particle alignment method holds significant potential in the fabrication of high thermal conductivity polymer composites with low filler loading.