材料科学
基质(水族馆)
氮气
偏压
涂层
钒
蒸发
弧(几何)
粘附
复合材料
分析化学(期刊)
冶金
电压
化学
电气工程
热力学
有机化学
地质学
工程类
物理
几何学
海洋学
数学
作者
А.С. Куприн,A. Gilewicz,G.N. Tolmachova,І.О. Klimenko,І.V. Kolodiy,R.L. Vasilenko,B. Warcholiński
标识
DOI:10.1007/s11661-023-07177-8
摘要
Abstract The binary vanadium–nitrogen (V–N) coatings were formed using cathodic arc evaporation. Two sets of coatings were produced using: (a) nitrogen pressure (p N2 ) from 0.001 Pa to 3 Pa at a constant substrate bias voltage ( U B ) of − 100 V and (b) a substrate bias voltage from − 50 to − 300 V at a constant nitrogen pressure of 1.5 Pa. The influence of the above parameters on the coating properties, in particular on the insufficiently investigated and described adhesion of the coatings to the substrate, was demonstrated. The phase transformation V → V + V2N → V + c-VN → h-VN → h-VN + c-VN and c-VN → h-VN occurs for coatings formed with increasing nitrogen pressure and substrate bias voltage, respectively. With the increase in p N2 and U B , an increase in coating hardness and adhesion to the substrate is observed, as well as an improvement in wear resistance.
科研通智能强力驱动
Strongly Powered by AbleSci AI