Valorization of argan paste cake waste: Enhanced CO2 adsorption on chemically activated carbon

This study addresses the critical need to reduce energy penalties in CO 2 capture processes by exploring the potential of activated carbons derived from argan paste cake for post-combustion CO 2 capture applications. Leveraging their cost-effectiveness, stability in humid conditions, and microporous structure, a series of activated carbons with diverse textural characteristics were synthesized through a two-step chemical activation process employing a KOH: biochar ratio of 1:1. Activation temperatures ranged from 700 to 850 °C. Characterization techniques such as Raman spectroscopy , X-ray spectroscopy, scanning electron microscopy, transmission electron microscopy , elemental analysis , and Fourier-transform infrared spectroscopy were employed to analyze the structural and chemical properties of the synthesized activated carbons. Remarkably, all synthesized samples exhibited excellent CO 2 adsorption properties. Notably, the activated carbon sample prepared at 700 °C (APC-500–700) demonstrated the highest CO 2 adsorption capacity, reaching up to 4.89 mmol/g at 0 °C and 2.98 mmol/g at 25 °C. Additional samples, including APC-500–800 and APC-500–850, exhibited CO 2 adsorption capacities of 4.89 mmol/g and 4.83 mmol/g, respectively, at 0 °C, with corresponding values of 2.74 mmol/g and 2.60 mmol/g observed at 25 °C. Selectivity and stability tests were conducted to evaluate the adsorption performance under varied conditions, further highlighting the potential of activated carbon derived from argan paste cake in contributing to efficient CO 2 capture processes. These findings underscore the significance of synthesis conditions in tailoring adsorption performance and pave the way for the sustainable utilization of waste biomass for environmental applications. • Porous carbons are prepared from argan paste cake agro-residue. • Two- step chemical activation using KOH was adopted. • APC-500–700 presented a highest CO2 adsorption up to 4.89 mmol/g at 0 °C and 2.98 mmol/g at 25 °C. • APC-500–700 was regenerated up to 10 cycles demonstrates practical application.