Removal of La(III) by amino-phosphonic acid functionalized polystyrene microspheres prepared via electron beam irradiation

A new aminophosphonic acid chelating resin was successfully prepared via electron beam irradiation grafting combined with chemical modification and used for the efficient removal of La(III). Firstly, glycidyl methacrylate (GMA) was grafted to polystyrene microspheres (PS) via electron beam co-radiation to obtain PS-PGMA microspheres, then followed by the amination with diethylenetriamine (DETA) to formed PS-PGMA-DETA (PGD) microspheres through nucleophilic substitution between amino and epoxy group, and finally PS-PGMA-DETA-PA (PGDP) microspheres was obtained by phosphorylation with phosphorous acid (PA). The obtained chelating resin absorbent was characterized by Fourier-transform infrared (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), which demonstrated that the millimetric aminophosphonic acid chelating resin were successfully prepared with well-defined morphology and enhanced thermal stability. The X-ray photoelectron spectroscopy (XPS) characterization results confirmed a possible adsorption mechanism, which is mainly based on the chelation and coordination of N and O in PDGP with La(III) in the solution. A series of parameters were taken into account in the adsorption experiment, such as absorbed dose, GMA concentration, dosage of PGDP, pH, contact time, temperature, and the initial concentrations of La(III). The maximum adsorption capacity obtained from the research can be achieved 288.69 mg/g at 298.15 K, pH = 6. The kinetic sorption for for La(III) fitted the type 1 pseudo-second-order (R2 = 0.9981), which revealed that the La(III) are chemisorbed on the surface of the PGDP. It was concluded that the La(III) adsorption conformed to the Freundlich equation, indicating a multilayer adsorption process. Thermodynamic data indicated that the La(III) uptake process was a spontaneous and endothermic. In addition, this research provided a new irradiation grafting method for rare earth ions removal.