材料科学
残余应力
喷丸
压痕硬度
冶金
激光喷丸
成核
扫描电子显微镜
点蚀
休克(循环)
微观结构
复合材料
衍射
抗压强度
透射电子显微镜
腐蚀
光学
纳米技术
医学
化学
物理
有机化学
内科学
作者
Lei Guan,Zexin Ye,Xiangyu Yang,Jianmin Cai,Yu Li,Yang Li,Yongkang Zhang,Guan Wang
标识
DOI:10.1016/j.jmatprotec.2021.117091
摘要
Laser shock peening (LSP) was performed on a 316 stainless steel for microstructural and mechanical modifications. To identify the dominant factor controlling pitting corrosion resistance, a single LSP impact was performed and various characterization techniques, such as scanning electron microscopy, X-ray diffraction, transmission electron microscopy, electron backscattered diffraction, microhardness and residual stress analysis were conducted. The results show that a considerable increase in the microdefects, microhardness, and compressive residual stress occurred at a depth of ∼200 μm from the surface, while no evident grain refinement was observed. The compressive residual stress reduced the metastable pitting nucleation rate. However, microdefects after LSP treatment resulted in larger metastable pits, which are more likely to combine to transform into a stable one. It is summarised that the substantial microdefects can deteriorate the superiority of compressive residual stress induced by LSP in the pitting resistance of 316 stainless steel.
科研通智能强力驱动
Strongly Powered by AbleSci AI