材料科学
热导率
气凝胶
多孔性
复合材料
复合数
聚乙二醇
相变材料
化学工程
相(物质)
纳米纤维
共价键
原子层沉积
多孔介质
极限抗拉强度
热的
电导率
聚合物
电子设备和系统的热管理
氢键
热能储存
相变
保温
纳米技术
热稳定性
热膨胀
作者
Fan Xie,Wenting Zhang,Tao Liu,Yueyue Zhao,Jiayi Yan,Longhai Zhuo,Zhaoqing Lu
标识
DOI:10.1021/acsami.6c15610
摘要
Phase change materials (PCMs) hold great promise for thermal management, yet their low thermal conductivity and liquid leakage severely hinder practical applications. Herein, we designed a high-enthalpy phase change composite film (LMAP) based on l-Cysteine-functionalized MXene (l-MXene) and aramid nanofibers (ANFs). l-cysteine was bonded to MXene via covalent and coordination bonds, and further crosslinked with ANF through hydrogen bonds to form layered aerogel films with a porous scaffold structure, which was subsequently impregnated with polyethylene glycol (PEG). The unique porous layered architecture of LMAP-20 achieved a PEG loading of 86.71%, a phase-change enthalpy of 169.33 J/g, and a tensile strength of 17.26 MPa for favorable energy storage performance. Moreover, l-MXene nanosheets endowed LMAP-50 with a high thermal conductivity of 1.58 W/(m·K), which enabled outstanding thermal management and reduced the operating temperature of the LED chip by 21.4 °C. These results suggest that the l-MXene/ANF porous scaffold holds great potential for fabricating phase change composites with high thermal conductivity and suppressed leakage, which could be applied for efficient thermal management in advanced electronic devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI