材料科学
烧结
选择性激光烧结
激光器
飞秒
通量
进程窗口
制作
光电子学
纳秒
晶体管
光学
复合材料
电气工程
平版印刷术
物理
医学
替代医学
病理
电压
工程类
作者
Nilabh K. Roy,Obehi G. Dibua,William Jou,Feng He,Jihoon Jeong,Yaguo Wang,Michael Arthur Cullinan
摘要
A high electrical and thermal conductivity coupled with low costs make copper (Cu) an enticing alternative to aluminum for the fabrication of interconnects in packaging applications. To tap into the benefits of the ever-reducing size of transistors, it is required to increase the input/output pin count on electronic chips, and thus, minimize the size of chip to board interconnects. Laser sintering of Cu nanoparticle (NP) inks can serve as a promising process for developing these micron sized, 3D interconnect structures. However, the exact processing windows for Cu NP sintering are not well known. Therefore, this paper presents an extensive experimental investigation of the sintering processing window with different lasers including femtosecond (fs), nanosecond (ns), and continuous-wave (CW) lasers. The dependence of the processing window on Cu layer thicknesses and laser exposure durations has also been investigated. A simplified model to estimate optimum laser sintering windows for Cu NPs using pulsed lasers is presented and the predicted estimates are compared against the experimental results. Given the simplicity of the model, it is shown to provide good estimates for fluence required for the onset of sintering and the processing window for good sintering of Cu NPs.
科研通智能强力驱动
Strongly Powered by AbleSci AI