材料科学
锭
冶金
合金
极限抗拉强度
体积分数
变形(气象学)
纳米晶材料
粒度
延伸率
铬
复式(建筑)
降水
复合材料
遗传学
物理
纳米技术
DNA
生物
气象学
作者
Faqi Zhan,Xiao Liu,Hua Zhang,Keliang Wang,Shipeng Xu,Min Zhu,Yuehong Zheng,Peiqing La
出处
期刊:Crystals
[Multidisciplinary Digital Publishing Institute]
日期:2022-06-16
卷期号:12 (6): 848-848
被引量:3
标识
DOI:10.3390/cryst12060848
摘要
In this work, a large ingot of micro-nano structure 2507 duplex stainless steel was prepared in a single step using the aluminothermic reaction method. Chromium having different excess fractions were added to reaction powders to make up for evaporation loss, and the results show that the composition and structure of 2507 duplex stainless steel with a chromium excess ratio of 70% are satisfactory. The volume fraction of nanocrystalline in as-cast alloy was 41% and the average grain size was 34 nm. Additionally, the anticipated steels were rolled roughly with deformation of 40% at 1000 °C and followed by fine rolling with deformation of 30, 50 and 70%, separately, at 800 °C. Then, the effects of rolling deformation and precipitation on mechanical properties were studied in detail. Compared with the as-cast alloy, there was no phase transformation in the alloys with deformation of 30 and 50%, and they were still composed of γ and α phases, whereas the σ phase appeared in the alloy with deformation of 70%. When the deformation was 50%, the rolled alloy achieved the best performance, and the tensile strength, yield strength, and elongation were 912 MPa, 523 MPa, and 24.3%, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI