Mechanism of one-step hydrothermal nitric acid treatment for producing high adsorption capacity porous materials from coal gasification fine slag

The increasing amount of coal gasification fine slag (CGFS) necessitates its resource utilization. CGFS, mainly composed of porous carbonaceous particles and partially fused spherical or agglomerated ash particles, is an inexpensive and high-quality raw material for preparing adsorbent materials. However, the challenge remains in developing a simple, low-cost, and environmentally friendly method to produce high-performance porous materials from CGFS. In this study, a one-step treatment method using 2 mol/L nitric acid under hydrothermal conditions was proposed for CGFS. The adsorbent material (CGFS-2 M) prepared under a solid-liquid ratio of 2:5 and an initial concentration of 200 mg/L methylene blue (MB) exhibited an equilibrium adsorption capacity as high as 210.20 mg/g. The excellent adsorption performance of CGFS-2 M can be attributed to several factors: acid leaching for mineral removal and pore formation, resulting in a specific surface area and total pore volume 2.2 and 1.6 times that of untreated CGFS, respectively, and an optimized mesoporous pore size distribution favorable for MB adsorption; optimal mineral removal and a well-defined carbon microcrystal structure providing more space for MB adsorption; nitric acid treatment increasing the surface oxygen content and hydrophilicity, enhancing its ability to remove MB. The synergistic effect of pore structure improvement and surface modification indicates a feasible research direction for enhancing the performance of CGFS-based adsorbent materials. These results provide theoretical support for the development of efficient CGFS-based adsorbents.