Tuning the mechanical and thermoelectric properties of self‐standing stretchable PEDOT:PSS/SDBS films

Abstract Poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has recently attracted significant attention as a potential candidate for small‐scale thermoelectric conversion because of its ease of doping, and solution processability. This study addressed the fabrication of self‐standing PEDOT:PSS films modified with sodium dodecylbenzene sulfonate (SDBS) surfactant, presuming different annealing temperatures. According to the investigation, optimizing the annealing temperature improves crystal quality and increases the efficiency of PEDOT:PSS films. The resulting PEDOT:PSS films showed the highest electrical conductivity of about 623.68 Scm −1 and maximum power factor of 25.87 μWm −1 K −2 . In addition to confirming thermoelectric properties; SDBS surfactants are being investigated to plasticize PEDOT:PSS films at different concentrations and annealing temperatures. With an optimization in annealing temperature, the elongation at break value similarly improves; and the highest elongation at break was observed at 0.94 wt% SDBS concentration, reaching 32%. To completely understand the underlying reasons for this dependence, higher‐order structures and electronic states of polymer films have been examined using electronic reflectance spectroscopy and X‐ray diffraction analysis. Overall, the outcomes of this work show how important surfactants and their annealing temperature are for improving the mechanical and thermoelectric characteristics of self‐standing PEDOT:PSS films.