Effects of Functional Biomaterials on the Attributes of Orally Disintegrating Tablets Loaded with Furosemide Nanoparticles: In Vitro and In Vivo Evaluations

Furosemide (FUR) is a diuretic used to relieve edema, congestive heart failure, cirrhosis, end-stage renal disease, and hypertension. FUR is a class IV according to the Biopharmaceutics Classification System. It is practically insoluble in water. This study aimed to optimize and formulate porous orally disintegrating tablets (ODTs) prepared by sublimation and loaded with FUR nanoparticles prepared by using a planetary ball mill. Different functional biomaterials called stabilizers were used to stabilize the nanoparticle formula. Pluronic F-127 was the optimum stabilizer in terms of particle size (354.07 ± 6.44), zeta potential (−25.3 ± 5.65), and dissolution efficiency (56.34%). The impact of the stabilizer concentration was studied as well, and a concentration of 3% showed the smallest particle size (354.07 ± 6.44), best zeta potential value (−25.3 ± 5.65), and percentage of dissolution rate (56.34%). A FUR-loaded nanoparticle formula was successfully prepared. The nanoparticle formula was stabilized by using 3% pluronic F-127, and 3% was chosen for further study of the incorporation into oral disintegration tablets prepared by the sublimation technique. The impact of the matrix sublimating agent and superdisintegrant on the ODTs’ attributes (in vitro disintegration, wetting time, and in vitro dissolution efficiency) was studied using 32 full factorial designs. In vivo, the diuretic activity was tested for the optimized FUR ODTs by calculating the Lipschitz value using rats as an animal model. The stability of the ODTs loaded with FUR nanoparticles was assessed under accelerated conditions for 6 months. Finally, the ODT formula loaded with FUR NPs showed a rapid onset of action that was significantly faster than untreated drugs. Nanonization and ODT formulation enhances the dissolution rate and bioavailability of FUR. Many factors can be controlled to achieve optimization results, including the formulation and process parameters.