Effect of gap size on flange face corrosion

Abstract Bolted flanged joints play a critical role in offshore wind turbine tower structures, serving as integral components that connect various sections of the tower. This research study employs electrochemical techniques to investigate the effect of gap dimensions, which determine the crevice gap thickness and crevice depth, on corrosion behavior of 321 stainless steel flange sample plates in a 3.5 wt% NaCl solution at 50°C. Gaskets are used in this study to create gaps between two flange surfaces. A novel fixture is utilized to simulate the applied stress on the gasket, fluid flow within the fixture, and the geometric aspects of the gasket and flange. The findings reveal that increasing the gap thickness from 1.58 to 6.35 mm results in a rise in the general corrosion rate of the flange surface from 0.09 to 1.03 mm y −1 , and crevice corrosion initiation time increases from 0.23 to 3.12 h. Furthermore, reducing the crevice depth ( d ) from 7.49 to 0 mm leads to a decrease in the general corrosion rate from 0.09 mm y −1 to 0.04 µm y −1 , and cases with d = 3.81 and d = 0 mm show no observable crevice corrosion after potentiostatic tests.