Sensitive and Visual Detection of Phosgene by a TICT‐Based BODIPY Dye with 8‐(o‐Hydroxy)aniline as the Active Site

Phosgene and its substitutes (diphosgene and triphosgene) are widely utilized as chemical industrial materials and chemical warfare agents and pose a threat to public health and environmental safety due to their extreme toxicity. Research efforts have been directed to develop selective and sensitive detection methods for phosgene and its substitutes. In this paper, we have prepared two BODIPY-based fluorescent probes, o-Pah and o-Pha, which are two isomers with different active sites, ortho-aminohydroxy (3',4' or 4',3') phenyls at meso position of BODIPY, and compared their sensing performance toward triphosgene. The probe with o-(4'-amino-3'-hydroxyl), o-Pha, exhibits better sensing performance over the o-(3'-amino-4'-hydroxyl), o-Pah, for instance, a lower limit of detection (LOD) (0.34 nm vs. 1.2 nm), and more rapid response (10 s vs. 200 s). Furthermore, based on the above comparative studies, a red-fluorescence probe o-Phae has been constructed through extending 3,5-conjugation of o-Pha. The probe o-Phae displays rapid response (60 s), high sensitivity to triphosgene (LOD=0.88 nm), and high selectivity for triphosgene over relevant analytes including nitric oxide. Finally, a facile test strip for phosgene was fabricated by immobilizing o-Phae in a polyethylene oxide membrane for sensitive (<2 ppm) and selective detection of phosgene in the gas phase.