电解质
阳极
阴极
锂(药物)
化学工程
电化学
化学
离子电导率
相间
聚合
金属锂
重量分析
聚合物
电极
电导率
无机化学
电化学窗口
金属
准固态
电化学电池
枝晶(数学)
材料科学
磷酸钒锂电池
原位聚合
原位
高氯酸锂
离子键合
分解
高分子化学
电化学电位
沉积(地质)
作者
Shimei Li,Yu Tat Tse,Hu Hong,Yin Cui,Dedi Li,Shuo Feng,Yue Hou,Xun Guo,Qi Xiong,Dechao Zhang,Ao Chen,Shixun Wang,Chunyi Zhi
摘要
Polyether electrolytes are compelling candidates for lithium metal batteries owing to their high ionic conductivity and conformal interfacial contact. However, their widespread adoption is impeded by inherent vulnerabilities, including limited oxidative stability against high-voltage cathodes, uncontrolled lithium dendrite growth, and persistent interfacial side reactions. To overcome these challenges, we report an in situ polymerized cross-linked polyether electrolyte engineered with a bifluorinated molecular architecture (PTFMO-BEP), incorporating −CF2– segments in the polymer backbone and −CF3 groups on the side chains. This design significantly enhances the intrinsic oxidative stability, extending the electrochemical window beyond 5.5 V. Concurrently, the electron-withdrawing fluorinated motifs weaken the Li+-polymer coordination, steering an anion-derived decomposition pathway to form a homogeneous, inorganic-rich solid electrolyte interphase (SEI). Consequently, the PTFMO-BEP electrolyte enables exceptional cyclability in Li||Li symmetric cells (>800 h) and uniform, dendrite-free lithium deposition. When paired with high-loading LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes (∼4.4 mAh cm–2) and thin lithium anode (50 μm), the Li||NCM811 full cells achieve outstanding capacity retention of 85.6% after 150 cycles at 4.3 V and 91.5% after 100 cycles at 4.5 V. Remarkably, stable operation is maintained even under an ultrahigh cutoff voltage of 4.7 V with a 20 μm Li anode (88.7% retention over 100 cycles). Furthermore, ampere-hour-scale pouch cells configured with LiNi0.90Co0.05Mn0.05O2 (NCM9055) cathodes deliver a high gravimetric energy density of 510.1 Wh kg–1. This work exemplifies a potent molecular-design strategy to advance polyether electrolytes for practical high-energy-density lithium metal batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI