材料科学
阴极
电解质
焦绿石
氧气
氧化物
化学工程
涂层
电化学
析氧
电池(电)
氧气储存
氧化还原
无机化学
氧传感器
阳极
降级(电信)
氧化铈
兴奋剂
电极
纳米技术
过渡金属
纳米颗粒
作者
Shijian Luo,Chenchen Song,Huilin Zhao,Peng Lv,Wei Kong Pang,Zhenxiang Cheng,Ying Bai
摘要
Nickel‐rich layered oxides (≥ 80% Ni) are pivotal cathode materials for next‐generation high‐energy lithium‐ion batteries. However, under high cutoff voltage, the over‐oxidation of active cations and oxygen anions triggers structural instability and the continuous migration of O n− (0 < n < 2) radicals, rapidly leading to oxygen release, transition metal (TM) dissolution, electrolyte decomposition, and consequently severe degradation of electrochemical performance. Herein, a two‐pronged strategy is proposed to enhance the redox reversibility of lattice oxygen and suppress oxygen release from LiNi 0.84 Co 0.08 Mn 0.08 O 2 (NCM) during cycling. Combining a Ce‐based pyrochlore coating that possesses a high oxygen storage capacity with bulk Ce doping that modulates the TM─O bonds, the modified NCM cathode exhibits exceptional cycling stability under harsh operating conditions. The assembled CR2032 cells achieved 72.2% capacity retention after 400 cycles at 1 C under a high cutoff voltage of 4.50 V at 60°C. Moreover, pouch‐type full cells exhibit ultra‐stable cycling performance, retaining 91.0% capacity after 1000 cycles at 1 C within 2.75–4.20 V, and 80.2% after 1000 cycles when the upper cutoff voltage is raised to 4.40 V. This work not only provides a feasible two‐pronged modification strategy for layered oxide cathodes but also promotes the development of ultrahigh‐energy‐density rechargeable batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI