胶粘剂
材料科学
柠檬酸
摩尔比
固化(化学)
湿强度
复合材料
耐水性
抗剪强度(土壤)
制浆造纸工业
臼齿
粘结强度
山梨醇
粘结强度
生物降解
化学工程
持续性
耐久性
粘接
耐化学性
多元醇
水溶液
化学改性
工程木材
碱度
作者
Thi Thuan Nguyen,Xiaojian Zhou,Xinyi Chen,Haizhu Wu,Manh Tuong Vu,Van Tu Nguyen
标识
DOI:10.1080/01694243.2026.2693623
摘要
Traditional wood adhesives are mainly derived from non-renewable fossil resources, raising sustainability concerns. As a sustainable alternative, biomass-based adhesives have attracted attention due to their biodegradability and renewability; however, their poor water resistance and limited bond strength restrict broader applications. In this study, a bio-based plywood adhesive was developed from sorbitol and citric acid (CA) via esterification and characterized using FTIR, TGA/DTG, and SEM. The effects of sorbitol-to-citric acid (Sor:CA) molar ratio and reaction time on curing behavior and adhesive performance were evaluated. Increasing the Sor:CA molar ratio was more effective in enhancing the shear strength and water resistance of plywood than extending the reaction time. At a Sor:CA molar ratio of 1:3 and a reaction time of 60 min, the dry and wet shear strengths best satisfied the standard requirement (≥0.7 MPa, GB/T 9846-2015), suggesting that this fully bio-based adhesive may be a viable option for sustainable industrial applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI