高密度聚乙烯
吸水率
肿胀 的
杨氏模量
材料科学
粒径
稻草
抗弯强度
制浆造纸工业
复合材料
聚乙烯
化学
化学工程
工程类
无机化学
作者
Adriana Rojas-León,Fabiola Araceli Guzmán‐Ortiz,A.M. Bolarín-Miró,Otazo Sánchez,Francisco Prieto García,Francisco Javier Fuentes-Talavera,Alma Delia Román‐Gutiérrez
出处
期刊:Revista Mexicana De Ingenieria Quimica
[Universidad Autónoma Metropolitana]
日期:2018-06-18
卷期号:19 (1): 57-68
被引量:4
标识
DOI:10.24275/uam/izt/dcbi/revmexingquim/2019v18n1/rojas
摘要
Barley straw (BS) and recycled high-density polyethylene (rHDPE) are wastes that representan environmental problem due to the large quantities that are generated each year and not subject to recycling processes. In this study, both residues were usedin the manufacture of particleboard. The aim of this research was to characterize the mechanical and water resistance properties ofpanels, modifying its particle size (0.425, 0.60 and 1.00 mm), bonded with rHDPE by three content levels (40, 50 and 60%). Also, a center 23experimental designs and was employed. The evaluated water absorption (WA) and thickness swelling (TS) after 2 and 24 h were measured to determine the dimensional stability of the particleboards. The evaluated mechanical properties were the modulusof rupture (MOR) and modulus of elasticity (MOE). The results showed that particle size and components proportion were significantly influencing both mechanical and physical properties. The WA and TS decrease proportionally as the particle size and the content of rHDPE increase. The MOR and MOE are negatively affected by an increase in the content of rHDPE and the particle size. Wastes that BS and rHDPE can be used to manufacture value-added particleboards that meet quality standards.
科研通智能强力驱动
Strongly Powered by AbleSci AI