清晨好,您是今天最早来到科研通的研友!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您科研之路漫漫前行!

Development of a nickel-based filler metal containing a small amount of silicon

作者
Takehiko Watanabe,Ken Wakatsuki,Atsusi YANAGISAWA,Tomohiro Sasaki
出处
期刊:Quarterly Journal of The Japan Welding Society [Japan Welding Society]
卷期号:29 (4): 241-247 被引量:1
标识
DOI:10.2207/qjjws.29.241
摘要

Authors tried to develop a new nickel-based brazing filler metal containing no boron and phosphorous to suppress the formation of brittle phases in a brazed layer. The properties of a joint brazed using the new filler metal were investigated and compared with those of a brazed joint using a conventional nickel-based filler metal of BNi-5. The following results were obtained in this study.A new nickel-based brazing filler metal was successfully developed, which contains a small amount of Si and Mn and shows the melting temperature lower than about 1090°C. The hardness of the new filler metal was about 40% that of BNi-5 filler metal containing about 10% Si.In brazing of SUS304 stainless steel, using BNi-5 filler metal, a hard and brittle finally-solidified region appeared in the brazed layers with joint clearance over 100μm. However, using the new filler metal, the finally-solidified region appeared in the brazed layers with joint clearance over 200μm. The hardness of the finally-solidified region in the brazed layer using the new filler metal was about 54% that using BNi-5 filler metal.The tensile strength of a SUS304 joint brazed using BNi-5 filler metal extremely decreased at joint clearance over 100μm. On the other hand, the tensile strength of a joint brazed using the new filler metal decreased at joint clearance over 200μm. It seems that the brittle finally-solidified region formed in a brazed layer causes the joint to decrease the tensile strength.It was shown that the newly developed filler metal is superior to the conventional BNi-5 filler metal in hardness and in tensile strength of joints with wider joint clearance.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
vbnn完成签到 ,获得积分10
4秒前
5秒前
忘忧Aquarius完成签到,获得积分0
6秒前
buqi完成签到,获得积分10
7秒前
10秒前
linj完成签到,获得积分10
11秒前
petrichor完成签到 ,获得积分10
11秒前
正常糖完成签到 ,获得积分10
16秒前
独特问梅完成签到,获得积分10
18秒前
单纯冰菱完成签到,获得积分10
22秒前
小蘑菇的应助被TingtingGZ采纳,获得10
24秒前
berry完成签到,获得积分10
32秒前
Jasonkun完成签到,获得积分10
33秒前
jlin完成签到,获得积分10
35秒前
creep2020完成签到,获得积分0
43秒前
muriel完成签到,获得积分0
46秒前
冷静的尔竹完成签到,获得积分10
52秒前
无奈小玉完成签到,获得积分10
53秒前
53秒前
CodeCraft的应助被蜗牛好好飞采纳,获得10
54秒前
珈沐完成签到,获得积分10
56秒前
TingtingGZ发布了新的文献求助10
59秒前
e746700020完成签到,获得积分10
59秒前
火星上的小蚂蚁完成签到,获得积分10
1分钟前
耍酷平凡完成签到,获得积分10
1分钟前
mailang完成签到,获得积分10
1分钟前
1分钟前
体贴雪萍完成签到,获得积分10
1分钟前
房天川完成签到 ,获得积分10
1分钟前
明朗完成签到 ,获得积分0
1分钟前
1分钟前
lynn发布了新的文献求助10
1分钟前
1分钟前
lynn完成签到,获得积分20
1分钟前
正直寻绿完成签到,获得积分10
1分钟前
cocolinfly完成签到 ,获得积分10
1分钟前
科目三的应助被TingtingGZ采纳,获得10
2分钟前
多情莫言完成签到,获得积分10
2分钟前
无私的世界完成签到 ,获得积分10
2分钟前
2分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8173213
求助须知:如何正确求助?哪些是违规求助? 9565567
关于积分的说明 21780511
捐赠科研通 7767373
什么是DOI,文献DOI怎么找? 3431542
关于科研通互助平台的介绍 2555730
邀请新用户注册赠送积分活动 2476697