MODELLING OF STRESS DEVELOPMENT DURING DRYING AND RELIEF DURING STEAMING INPINUS RADIATALUMBER

ABSTRACT A one-dimensional stress model was proposed for drying of radiata pine lumber, which has considered wood moisture shrinkage, instantaneous stress-strain relationships, mechano-sorptive creep, time-induced creep and temperature effects. In addition, wood hardening behaviour in the plastic region and differences between stress increase and decrease have been taken into account. The proposed Stress model can predict stress development and relief in a drying cycle once the required wood mechanical and Theological properties have been quantified. Drying experiments were performed to dry Pinus radiata sap wood boards of 100×40×590 mm in a tunnel dryer. In the experiment, wood temperature, moisture content gradient and residual stress through board thickness were measured. The drying cycle included HT drying, cooling and final steam conditioning. The measured stress patterns were in agreement with the model predictions. However, more accurate calculations will be made once the detailed experimental data for radiata pine wood mechanical and rheological properties are available.