化学
乳状液
层状结构
化学工程
相位反转
纳米颗粒
结晶学
有机化学
膜
生物化学
工程类
作者
Khairul Anwar Ishak,Mohamad Suffian Mohamad Annuar
标识
DOI:10.1007/s11743-017-1928-x
摘要
Abstract The assembly of nanoparticles incorporating bacterial medium‐chain‐length poly‐3‐hydroxyalkanoates (mcl‐PHA) via phase inversion emulsification (PIE) was investigated. Sequential addition of water into an agitated mixture of carrier oil (jojoba oil), nonionic surfactants (Cremophor EL and Span 80) and melted mcl‐PHA triggered phase inversion of water‐in‐oil (W/O) to oil‐in‐water (O/W) emulsion. The emulsion inversion point (EIP) at 30% w/w of water content was determined by abrupt changes in viscosity and conductivity of the suspension. Concurrently, infrared transmittance of the O–H group of water, the C–O–C group of surfactants and the C–H group of alkane chain were practically identical while Small Angle X‐ray Scattering indicated the presence of a bi‐continuous/lamellar structure. The morphology of the emulsion changed, with increasing water content, from W/O to bi‐continuous/lamellar structure and finally to O/W. mcl‐PHA appears to form a bridging polymeric network, covering the nanoparticle with a protective layer for enhanced protection of the encapsulated compound. A hypothetical mechanism for the mcl‐PHA‐based nanoparticle assembly is also proposed.
科研通智能强力驱动
Strongly Powered by AbleSci AI