Keeping the driver in the loop through semi-automated or manual lane changes in conditionally automated driving

In the current study we investigated if drivers of conditionally automated vehicles can be kept in the loop through lane change maneuvers. More specifically, we examined whether involving drivers in lane-changes during a conditionally automated ride can influence critical take-over behavior and keep drivers’ gaze on the road. In a repeated measures driving simulator study (n = 85), drivers drove the same route three times, each trial containing four lane changes that were all either (1) automated, (2) semi-automated or (3) manual. Each ride ended with a critical take-over situation that could be solved by braking and/or steering. Critical take-over reactions were analyzed with a linear mixed model and parametric accelerated failure time survival analysis. As expected, semi-automated and manual lane changes throughout the ride led to 13.5% and 17.0% faster maximum deceleration compared to automated lane changes. Additionally, semi-automated and manual lane changes improved the quality of the take-over by significantly decreasing standard deviation of the steering wheel angle. Unexpectedly, drivers in the semi-automated condition were slowest to start the braking maneuver. This may have been caused by the drivers’ confusion as to how the semi-automated system would react. Additionally, the percentage gaze off-the-road was significantly decreased by the semi-automated (6.0%) and manual (6.6%) lane changes. Taken together, the results suggest that semi-automated and manual transitions may be an alarm-free instrument which developers could use to help maintain drivers’ perception–action loop and improve automated driving safety.