Tolerant fuel for VVER reactors

Abstract The main factor of destruction of fuel rods in accidents with loss of coolant is associated with the vapor-zirconium reaction occurring between the fuel rod shell and the coolant (water). Improving the reliability of fuel cells can be obtained by modifying or replacing the fuel shell, materials that do not interact with the coolant during normal operation and in emergencies. The loss of coolant accident is a design-basis accident in light water reactors. The postulated accident requires an analysis of the double guillotine break in a main primary coolant pipe, which allows the coolant to freely discharge out of the primary system into the containment of the building. In the present work, the heat stored in the active zone of the reactor, the heat capacity of the fuel and the shell temperatures are determined for ATF materials U-10Mo and U 3 Si 2 . The calculated values are compared with the usually used fuel UO 2 . The results showed beneficial effect of using ATF materials. The above quantities are decreased dramatically for ATF, promising to replace UO 2 with ATF fuels. This reduces the probabilities of accidents and oxidation in the nuclear reactors. The calculations are done for nuclear power plant, type VVER-1200.