Experimental Evaluation of Fire Resistance Limits for Steel Constructions with Fire-Retardant Coatings at Various Fire Conditions

The experimental evaluation of fire resistance limits for steel constructions with fire-retardant coatings consists of a lot of experiments on the heating of steel structures of buildings by solving a heat engineering problem at various fire conditions. Building design implies the assessment of compliance of actual fire resistance limits for steel constructions with the required limits. Fire resistance limits for steel constructions are determined for “standard” temperature mode, and this can lead to overestimated fire resistance and underestimated heat influence for a real fire. Estimation of the convergence for “standard” temperature mode and possible “real” fire mode, as well as of the compliance of actual fire resistance limits with real fire conditions, was realized in the following stages: mathematical modeling of real fire development by the field model in software package Fire Dynamics Simulation (FDS) with various fire loads and mathematical modeling of steel construction heating for the standard temperature mode obtained by modeling “real” fire modes (the finite difference method of solving the Fourier heat conduction equation at external and internal nonlinearities was used for modeling the process of steel structure heating with the implementation in the ANSYS mechanical software package). Experiments of the assessment of fire-protective paint’s effectiveness were carried out for standard temperature mode and obtained by modeling “real” fire modes. The equivalent fire duration dependence on fire load type was determined. This dependence can be taken into account in determination of fire resistance limits for steel constructions in warehouse building roofing. Fire-protective paint effectiveness was estimated for “standard” temperature mode and various other temperature modes.