X射线光电子能谱
过氧二硫酸盐
介孔材料
扫描电子显微镜
过硫酸盐
化学工程
双酚A
材料科学
透射电子显微镜
比表面积
介孔二氧化硅
吸附
催化作用
化学
核化学
纳米技术
有机化学
吸附
环氧树脂
复合材料
工程类
作者
Liang Sun,Zhang Ziyu,Wang Fulong,Bai Maojuan,Deng Xiaoyan,Lingyun Wang
标识
DOI:10.1016/j.envres.2021.112529
摘要
In the present work, mesoporous silica spheres-doping CuO (CuO/MSS) was prepared via a facile hydrothermal method. It acted as a peroxydisulfate (PDS) activator for the removal of bisphenol A (BPA). X-Ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDS) showed that CuO was successfully synthesized and silica spheres were doped in CuO. Nitrogen sorption isotherm showed that CuO/MSS, which had a high specific surface area and a narrow pore size distribution, exhibited a mesoporous structure. The effect of initial pH, PDS dosage, catalyst amount, and activation temperature was assessed. A removal efficiency of over 80% was observed after five consecutive cycles, suggesting the superior stability of the catalyst. X-ray photoelectron spectroscopy (XPS), radical quenching experiments, and electrochemical evaluation showed that BPA removal was dominated by the electron transfer among PDS, BPA, and the surface of CuO/MSS (non-radical pathway), while SO4·- and OH· radicals had a minor contribution (radical pathway). In addition, the degradation pathways of BPA were proposed according to the intermediates. Overall, this study indicates that CuO/MSS is a promising effective PDS activator to address the drawbacks of the classical Fenton process.
科研通智能强力驱动
Strongly Powered by AbleSci AI