固化(化学)
材料科学
紫外线
抗弯强度
计算机科学
辐照
信号强度
射频识别
无线电频率
衰减
红外线的
复合材料
信号(编程语言)
电介质
可靠性工程
声学
温度测量
工艺工程
电子工程
无线电波
绝缘体(电)
法律工程学
信号处理
作者
Peijie Wang,Qi Yan,Wenlin Jing,Wu Zhang,Jingguo Cao,Chunyan Gao
标识
DOI:10.1088/1361-665x/ae68c6
摘要
Abstract In ultraviolet-cured in-place pipe (UV-CIPP) rehabilitation, the uniformity and completeness of liner curing are critical to repair quality. However, many existing monitoring methods are not suitable for in-situ , real-time, and low-cost application in engineering practice. To address this limitation, this study proposes an online monitoring method based on the received signal strength indicator (RSSI) of passive radio frequency identification (RFID) tags. RFID tags are embedded into glass fiber-reinforced unsaturated polyester resin composites, and the correlation between RSSI evolution and material curing behavior under UV irradiation is systematically examined. It is demonstrated that the RSSI signal remains closely synchronized with changes in the dielectric constant of the composite throughout the curing process, a finding further supported by temperature measurements. Comparative experiments under different UV irradiation powers and exposure distances consistently validate this trend. Thus, the RSSI signal therefore provides an effective indication of curing reaction kinetics and stage evolution. Fourier-transform infrared spectroscopy is used to quantify the relationship between RSSI and the degree of cure. The relationship between RSSI and degree of cure is well described by a logistic model, with a high coefficient of determination ( R 2 = 0.9584). Flexural tests evaluate the mechanical performance of the composites. The findings indicate that the material already meets engineering application requirements when the RSSI signal reaches a stable plateau, and the incorporation of RFID tags does not compromise the final mechanical properties of the composite.
科研通智能强力驱动
Strongly Powered by AbleSci AI