激光器
光学
材料科学
激光功率缩放
能量转换效率
太阳能
光束发散
光束参数积
光电子学
激光束质量
激光泵浦
太阳能电池效率
太阳辐照度
太阳能
X射线激光器
太阳镜
梁(结构)
棒
锥面
注射播种机
太阳能电池理论
有源激光介质
分布反馈激光器
光伏系统
二极管泵浦固体激光器
太阳模拟器
作者
Dawei Liang,Hugo Costa,Bruno D. Tibúrcio,Cláudia R. Vistas,Anita Haeussler,Emmanuel Guillot,Joana Almeida
标识
DOI:10.1117/1.jpe.15.048001
摘要
Attaining efficient and stable TEM00-mode laser emission is a key challenge solar laser research, suited especially well for applications requiring low laser beam divergence and high flux level at a laser beam focal spot. The concept of the simultaneous solar pumping of multiple thin Ce:Nd:YAG rods constitutes an effective solution for enhancing laser output beam quality, power stability, and scalability. However, to the best of our knowledge, there is no report on the successful simultaneous emission of multiple TEM00-mode continuous-wave (cw) solar laser beams from a single-pump cavity. We, therefore, present here the first simultaneous emission of three 1064 nm TEM00-mode cw solar laser beams from a single laser head composed of a fused silica aspheric lens, a conical pump cavity, and three 2-mm diameter, 25-mm length Ce:Nd:YAG rods, which were actively cooled by water and solar-pumped through a heliostat-parabolic solar energy collection and concentration system of Procédés Matériaux et Energie Solaire – Centre National de la Recherche Scientifique (PROMES-CNRS). For 0.389 m2 effective solar collection area, 2.61 W total TEM00-mode cw solar laser power from the three laser beams was measured, corresponding to 6.71 W/m2 collection efficiency and 0.71% solar-to-laser power conversion efficiency, surpassing the previous records, attained using a single Ce:Nd:YAG rod and the same solar facility, by the factors of 1.43 and 1.13, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI