Bolt-bearing behavior of hybrid CFRP-steel laminates at low temperature

Hybrdization of CFRP with steel sheets enhances bolt-bearing performance. At room temperature, bearing strength is reported to increase while minimum edge and width distances decrease. To assess if this advantage persists under low temperature conditions, bolt-bearing tests following AITM 1-0009 are conducted at 23°C and −55°C. Various monolithic and hybrid configurations with different metal content and joint geometries are examined. Furthermore, ultrasound scanning and optical microscopy of the fracture plane is conducted. Hybridizing composites notably improves bearing capacity. However, the reinforcement effect is less pronounced at low temperatures compared to room temperature. The reduction in minimum edge and width distances with metal hybridization largely depends on the composite ply stacking, challenging general literature recommendations. Regarding damage mechanisms in the joints, fractography indicates that introduction of steel sheets relieves composite plies, isolates damage, and enhances load-bearing capacity through additional bending stiffness and significant plastic deformation of the metal.