亲爱的研友该休息了!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您度过漫漫科研夜!身体可是革命的本钱,早点休息,好梦!

Metamaterials for radiative sky cooling

辐射冷却 天空 辐射传输 物理 超材料 工程物理 材料科学 天体物理学 光学
作者
Shanhui Fan,Aaswath Pattabhi Raman
出处
期刊:National Science Review [Oxford University Press]
卷期号:5 (2): 132-133 被引量:96
标识
DOI:10.1093/nsr/nwy012
摘要

From fundamental thermodynamic considerations, in order to convert heat to usable work, it is important to have a heat source with a temperature that is as high as possible, and to have a heat sink with a temperature that is as low as possible. The vast majority of energy conversion processes at the moment use our ambient surroundings on Earth itself, with a temperature of approximately 300 K, as the heat sink. On the other hand, the universe, with a temperature of approximately 3 K, represents a much better heat sink. The ability to harness the coldness of the universe could therefore have broad implications for energy technologies in general, and represents an important emerging frontier in renewable energy research. The ability of photonic structures such as metamaterials to control the behavior of electromagnetic waves is essential to effectively harness the coldness of the universe. Earth's atmosphere is largely transparent to electromagnetic waves in the wavelength range of 8–13 μm. This wavelength range coincides with the spectral peak for black body radiation at 300 K. Thus, any object, when exposed to the sky, can radiate its heat out in a process known as radiative cooling (Fig. 1a) and passively reach sub-ambient temperatures. This natural phenomenon has been implemented and studied at night for centuries. However, to improve the thermodynamic efficiency of energy technologies in general, and for cooling applications in particular, it would be far more useful to enable the same cooling effect during the day. The challenge here is that a sky-facing object faces the sun directly during daylight hours. For this purpose, then, one would need to create a structure that reflects the entire solar spectrum very well, while at the same time generating strong thermal radiation in the 8–13 μm wavelength range (Fig. 1b). (a) The concept of radiative sky cooling presented in the context of major thermodynamic resources around Earth. (b) To optimize radiative sky cooling, one needs to create a structure that achieves broad-band reflection of sunlight and strong thermal emission in the primary transparency window of the atmosphere between 8–13 μm. (c) A multilayer metamaterial structure deposited on a silicon wafer that functions as a daytime radiative cooler. (Taken from Ref. [2].) The four layers with nanoscale thickness are illustrated in the left panel. The dark and light regions correspond to HfO2 and SiO2 respectively. (d) A metamaterial film developed for radiative sky cooling. (Taken from Ref. [4].) (e) A fluid cooling panel incorporating a metamaterial radiative cooler, heat exchanger and circulating water loops. (Taken from Ref. [5].) In 2013, our group at Stanford University provided the first theoretical design of a photonic structure capable of achieving daytime radiative cooling [1]. The structure has a spectrum that resembles the ideal spectrum shown in Fig. 1b. The theory predicted [1] that under realistic atmospheric conditions, such a photonic structure would be able to reach a temperature 40–60°C below ambient air temperature passively, or alternatively to achieve a cooling power density exceeding 100 W/m2 at the ambient temperature of 300 K. In 2014, as the first experimental demonstration of daytime radiative cooling, we created a multilayer dielectric structure with a silver backing layer (Fig. 1c). The dielectric layers collectively enhanced solar reflection while also providing strong and selective thermal emission at the desired mid-infrared wavelengths through a metamaterial-like design. When placed in a roof-top measurement setup, we showed that the structure was able to reach a temperature that is 5°C below the ambient air temperature, in spite of having 900 W/m2 of sunlight directly incident upon it [2]. This experimental work also highlighted the importance of thermal design of the overall experimental setup, together with metamaterial design, for radiative cooling purposes. In a subsequent experiment, we demonstrated over 40°C reduction from the ambient air temperature with a selective thermal emitter [3], by placing the sample inside a sky-facing vacuum chamber that largely eliminated parasitic heat gain. Building upon these initial demonstrations, further experimental progress has been made in scaling up metamaterial designs, and in integrating metamaterial radiative cooling surfaces with air-conditioning and refrigeration systems. The groups of Xiaobo Yin and Ronggui Yang [4] at the University of Colorado demonstrated a random glass–polymer hybrid metamaterial (Fig. 1d) that is scalable over a large area, and observed a cooling power density of 93 W/m2. Our group has recently made an advance in the integration of radiative sky cooling with commercial-scale cooling systems, by demonstrating fluid cooling panels that incorporate scalable multilayer films. We demonstrated large-area (> 1 m2) fluid cooling panels (Fig. 1e) that passively cool fluids 3–5°C below air temperature at relevant flow-rates [5]. Such fluid cooling panels can be used to improve the overall efficiency of the cooling system by 20% or more, by cooling refrigerant at the condenser of a vapor-compression cooling system below what is possible today. Central to recent advances in radiative sky cooling has been the capability of photonic structures and metamaterials to control electromagnetic radiation over a very broad-band wavelength range, spanning ultraviolet to mid-wave infrared. This success in demonstrating radiative sky cooling, from the conceptual to pre-commercial stage, highlights the significant untapped potential of using metamaterials for renewable energy applications. The work was supported by the Advanced Project Research Agency—Energy (ARPAE) of the US Department of Energy (DE-AR0000316) and the Global Climate and Energy Project (GCEP) at Stanford University. The authors acknowledge the contributions of Dr E. Rephaeli, Mr M. Anoma, Dr L. Zhu, Dr Z. Chen and Dr E. Goldstein to the works carried out at Stanford University that are reviewed here.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
7秒前
orixero的应助被五岁的哈士奇采纳,获得10
10秒前
19秒前
丘比特的应助被HJJHJH采纳,获得10
20秒前
小小昌发布了新的文献求助10
25秒前
柔弱的铅笔完成签到,获得积分10
31秒前
31秒前
W主任的应助被科研通管家采纳,获得10
35秒前
奔跑的应助被科研通管家采纳,获得10
35秒前
稳重仇天完成签到,获得积分10
38秒前
40秒前
46秒前
46秒前
星球日记完成签到 ,获得积分10
48秒前
49秒前
54秒前
迷人白桃完成签到,获得积分10
58秒前
bkagyin的应助被成就的明辉采纳,获得10
1分钟前
1分钟前
QingSun1发布了新的文献求助10
1分钟前
888发布了新的文献求助30
1分钟前
安详老鼠完成签到,获得积分10
1分钟前
1分钟前
Shu完成签到,获得积分10
1分钟前
情怀的应助被888采纳,获得30
1分钟前
纯情的阁完成签到,获得积分10
1分钟前
向日葵的微笑完成签到,获得积分10
1分钟前
刻苦的煎蛋完成签到,获得积分10
1分钟前
cc完成签到,获得积分10
1分钟前
希望天下0贩的0的应助被www采纳,获得30
1分钟前
一条好ham完成签到,获得积分10
1分钟前
ssgg完成签到,获得积分10
1分钟前
小绵羊完成签到,获得积分10
1分钟前
不爱写论文完成签到,获得积分10
1分钟前
香蕉觅云的应助被QingSun1采纳,获得10
1分钟前
Lynee完成签到,获得积分10
1分钟前
专注的天菱完成签到,获得积分10
1分钟前
QingSun1完成签到,获得积分10
1分钟前
小辣椒完成签到,获得积分10
1分钟前
Lan完成签到 ,获得积分10
1分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8179873
求助须知:如何正确求助?哪些是违规求助? 9570055
关于积分的说明 21808206
捐赠科研通 7775540
什么是DOI,文献DOI怎么找? 3433157
关于科研通互助平台的介绍 2557278
邀请新用户注册赠送积分活动 2478846