兴奋剂
热电效应
材料科学
凝聚态物理
有效质量(弹簧-质量系统)
塞贝克系数
半金属
电子能带结构
半导体
价带
退化(生物学)
带隙
光电子学
物理
热力学
生物
量子力学
生物信息学
作者
Min Zhou,Zachary M. Gibbs,Heng Wang,Yemao Han,Caini Xin,Laifeng Li,Gerald Jeffrey Snyder
摘要
p-Type PbTe is an outstanding high temperature thermoelectric material with zT of 2 at high temperatures due to its complex band structure which leads to high valley degeneracy. Lead-free SnTe has a similar electronic band structure, which suggests that it may also be a good thermoelectric material. However, stoichiometric SnTe is a strongly p-type semiconductor with a carrier concentration of about 1 × 10(20) cm(-3), which corresponds to a minimum Seebeck coefficient and zT. While in the case of p-PbTe (and n-type La3Te4) one would normally achieve higher zT by using high carrier density in order to populate the secondary band with higher valley degeneracy, SnTe behaves differently. It has a very light, upper valence band which is shown in this work to provide higher zT than doping towards the heavier second band. Therefore, decreasing the hole concentration to maximize the performance of the light band results in higher zT than doping into the high degeneracy heavy band. Here we tune the electrical transport properties of SnTe by decreasing the carrier concentration with iodine doping, and increasing the carrier concentration with Gd doping or by making the samples Te deficient. A peak zT value of 0.6 at 700 K was obtained for SnTe0.985I0.015 which optimizes the light, upper valence band, which is about 50% higher than the other peak zT value of 0.4 for GdzSn1-zTe and SnTe1+y which utilize the high valley degeneracy secondary valence band.
科研通智能强力驱动
Strongly Powered by AbleSci AI