Can injecting additional green hydrogen result in environmentally friendly solar-biomass integration? Comprehensive comparison and multi-objective optimization

The present work proposes an innovative system for decarbonizing the energy mix and accelerating the worldwide green transition process. The system is driven by a biomass digester integrated with the supercritical carbon dioxide cycle for power generation and a multi-effect desalination unit for drinkable water production. At the heart of this concept is additional hydrogen injection through a proton exchange membrane electrolyzer based on photovoltaic panels. The suggested innovative model's techno-environmental, sustainability, and economic aspects are assessed and compared with a similar system without hydrogen injection. Then, a comparative multi-criteria optimization is applied to find the most optimal conditions from various facets based on the genetic algorithm with machine learning techniques. Afterward, the system's performance at different optimal conditions is analyzed and compared by evaluating the most significant techno-economic, environmental, and sustainability indicators. The parametric assessment comparing different models indicates that the proposed novel model, including increased hydrogen injection, surpasses the basic system in terms of performance efficiencies, emissions, and energy costs. In the first optimization scenario, the proposed method demonstrates robustness by achieving higher water production of 1,456 kg/s, a lower total cost of 118 $/h, and a higher net power of 1.1 MW than the design condition. When considering the sustainability index, energy cost, and emission metric as the optimization objective, their values are altered from 0.81 to 0.85, 92.5 $/MWh to 89.7 $/MWh, and 64.2 kg/MWh to 53.6 kg/MWh. The results further show that when prioritizing the sustainability index, energy cost, and emission as objectives, all components perform better from the energy conversion quality aspect compared to the scenario where water production, total cost, and net power are the optimization objectives. Finally, it is observed that the combustion chamber and solar panels are the worst components from the irreversibility aspect because of the highest exergy destruction rate.