3D‐printed custom tray for maxillofacial implant assisted partial denture

Abstract This technique presents a new fabrication workflow for a three‐dimensional (3D) printed custom tray, which duplicates the morphology of the treatment denture for maxillofacial prostheses using an intraoral scanner, computer‐aided design (CAD) software, and a 3D printer. A 70‐year‐old man underwent reconstruction of segmental mandibulectomy for mandibular osteoblastoma, followed by implant placement and secondary surgery. During the surgical treatment, a treatment denture was fabricated to restore oral function and determine the morphology of the definitive denture. To create the definitive denture with the same morphology as the treatment denture a custom tray was fabricated with the denture morphology after chairside adjustments. The oral cavity was scanned using an intraoral scanner, and the data acquired were imported into general‐purpose CAD software, adjusted, and imported into a 3D printer to produce the custom tray. This was fitted into the patient's mouth without any issues, and closed tray impressions were made with impression caps for the locator attachments on the implant body. The morphology of the treatment denture was replicated in the definitive denture by making a silicon impression of the cameo surface at the fabrication of the cast after impression making. In this technique, the morphology of the treatment denture was transferred accurately to the definitive implant partial denture by leveraging existing digital technology. This method represents a practical approach for partial denture fabrication, including maxillofacial defects with complex denture configurations.