Impact of inverse unequal height strut structure on the functional performance of an additively manufactured cardiovascular stent

Recently, additive manufacturing (AM) has been investigated as an innovative method to manufacture stents due to its capability in producing complex and customized structures. In this paper, the cardiovascular stents of M-type and N-type with inverse unequal height strut structure and N-type with equal height strut structure were designed and manufactured by Selective Laser Melting (SLM). Following surface polishing, balloon expansion, plane compression and three-point bending experiments were carried out to evaluate the mechanical performance of the stent. The stents designed with inverse unequal height strut structure showed higher radial support performance and lower radial recoil when compared to the stents with uniform design. This study proved the feasibility of SLM in rapid manufacturing of cardiovascular stents that can be used for performance evaluation in design stage.